Saw-Tooth Greenhouse

Home / Greenhouses Manufacturing / Saw-Tooth Greenhouse
Saw-Tooth Greenhouse

A greenhouse with a saw-tooth roof design that allows effective natural ventilation, reducing the need for mechanical cooling.

Structure

  • Columns are made of galvanized tubes of 80 mm × 80 mm measurement and 2 mm thickness.
  • Arches are galvanized pipes of 60 mm diameter and 1.5 mm thickness.
  • Crop holder is a galvanized tube with the measurement of 40 × 80 mm and 1.5 mm thickness.
  • Longitudinal pipes are made of pipes with dimensions of 32 mm diameter and 1.5 mm thickness that are connecting between arches and supports.
  • The gutter is made of galvanized steel with 2 mm thickness.

Doors

Made of aluminum and composed of two pieces that can be dismantled to facilitate the movement of agricultural machinery; this house can be supplied with sterilization and a service room.

Roof and Sides Cover

The greenhouse is covered using European plastic that is treated by ultraviolet rays with a thickness of 200 micron. Insect nets are used to cover the side and front ventilation windows.

Power Control Panel

The greenhouse is equipped with a power control panel and thermostats (thermal regulators) to control the upper and side ventilation with a meteorological station and wind speed measuring unit.

Upper Ventilation

The house is equipped with holes for upper ventilation openings from the gutter to the house top which is automatically controlled.

Side Ventilation

The house is equipped with side ventilation that can be manually or automatically controlled.

Specifications

No. of Greenhouses Greenhouse Width (m) Greenhouse Length (m) Drain Height (m) Top Height (m) Distance Between Arches (m) Front and Rear Corridors Width (m) Total Area (m²)
10 8.0 40.0 3.5 5.0 4.0 2.0 3520.0